Reset your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may need to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the configurations or are experiencing unexpected issues. Fortunately, resetting your Holosun is a straightforward process that can be completed in just a few procedures.

• Begin by ensuring your red dot sight is powered on.
• Identify the small reinitialize button on the rear of the unit.
• Employ a thin tool to activate the reset button for approximately 7 milliseconds.
• Let go the reset button and your Holosun EPS Carry Red Dot sight will power cycle.
• The red dot sight should now be returned to its factory settings.

Return to Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to return to original, resetting it to default configuration is a breeze. First, determine the tiny button on the bottom of your optic. Then, keep pressed it for around five seconds until you see a brief flash. Your Holosun EPS Carry is now reverted to its factory settings, ready for consistent targeting.

restore Your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some issues? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

• Simultaneously press and hold the power button for approximately 7 seconds.
• An indicator will flash, indicating that the reset is successfuly initiated.
• Release the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can re-attach the battery and verify your sight's functionality. If you encounter any further problems, don't hesitate How to factory reset holosun eps carry red dot? to seek help from Holosun's support.

Revert Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.

• Initially, Energize your Holosun EPS Carry by pressing the power button.
• Next, press and hold both the mode button and the up/down adjustment button simultaneously.
• As you continue holding these buttons, press the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Restore your Holosun EPS Carry via a Factory Default Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the solution. This will set back your sight to its original settings, clearing any custom configurations you've made. To perform this reset, adhere to these simple steps:

• Initially, locate the reset lever on your EPS Carry.
• Then, use a thin object, like a pen tip, to depress the reset lever.
• As you maintain the reset button engaged, turn your EPS Carry.
• It will blink a message confirming that the reset is finished.

Once the reset is successful, your EPS Carry will be returned to its factory settings.

Report this wiki page